It has been well supported since its release.
Inception Saddle Fireman Buckle Belt
Size range: 32 to 42 inches
Leather: Saddle leather
Buckle: Brass
Made in Japan
All colors produce good tuna.
Natural is a must-have color for leather lovers.
It is said that it was invented when British firefighters used metal fittings from hoses as buckles.
The leather used is domestically produced saddle leather.
Only the bends (butt part) of the leather is used, which is fully vegetable tanned.
It is soaked in the pit for one month longer than usual, resulting in a firm finish.
It maintains the Inception's unique quality of 5mm thickness, but is finished in a width of 33mm.
This item goes well with denim belt loops, of course, but also with narrow belt loops on work pants, etc.
When you are wearing it, force is applied to the outside, so it will not suddenly come off, but if you apply a firm downward pressure, the belt can be easily removed.
It is easy to put on and take off, but what makes it an attractive item is the presence of the buckle.
Available in different colors
NATURAL
BROWN
BLACK
Available in the three colors shown above.
Here is how to check the size of our belts (common):
Measure the length from the inside of the buckle to the center hole.
If you match it to the size of the bottoms you are actually wearing,
Please note that the size may not fit due to the waist position, etc.
It may be easier to understand if you measure the length of a belt you normally wear and compare it to the size.
Please feel free to contact us if you have any questions.